Armstrong Vari-Sharp Bandsaw Sharpener

or
Call (706) 324-2604
Description
The Armstrong No. 4 VariSharp CNC Bandsaw Sharpener is a heavy-duty, automated sawmill filing-room grinder that replaces traditional mechanical cams with a two-axis CNC system. Built on the frame of the industry-standard Armstrong No. 4 sharpener, it uses brushless servo motors, ball screws, and a touchscreen computer to grind virtually any wide-band saw tooth profile.
- Key Capabilities & TechnologyTwo-Axis CNC Control. Replaces mechanical grinding cams with precision ball screws and brushless servos, eliminating cam wear and manual changeovers.
- Variable Pitch & Depth (VP/VPD). Capable of sharpening standard constant-pitch saws as well as complex variable-pitch and variable-depth patterns (up to 10 teeth per repeating segment).
- On-Board Tooth Library & Design. Comes pre-loaded with over 300 Armstrong tooth patterns. Filers can draw, modify, and save custom profiles directly on the touchscreen or via Armstrong's VariDesign software, and export files (such as DXF) to share with saw manufacturers.
- Programmable Multi-Pass Grinding. Operators can set exact stock removal on the face and gullet, adjust the number of passes, and program the machine to grind Cobalt Chromium Alloy (Stellite) tips slowly on the first pass while rapidly skipping over the rest of the tooth.
- Variable Speeds. Grinding wheel RPM and feed rate (teeth per minute) are controlled directly from the touchscreen via a Variable Frequency Drive (VFD).
- Specifications & HardwareSaw Width Capacity. Typically handles wide bandsaws from 6" to 14" (or down to 4" when fitted with a narrow saw liner).
- Tooth Spacing (Pitch). Accommodates tooth spaces from 1.25" to 3.00" (32 mm to 76 mm).
- Grinding Motor. Equipped with a 2 HP VFD-controlled grinding wheel motor for consistent stock removal.
- Standard Hardware. Includes a Linear Slide (replacing older rocker-arm setups to maximize grinding wheel life), an oversized self-cleaning carbide faceplate, a SideWinder feed finger, a mechanical saw clamp, and a Control Tower with an integrated tooth counter for automatic shut-off.
- Common Upgrades. Often paired with pneumatic StrongArm II or SwingArm power clamps, an air back-feed unit, a ShapeUp diamond wheel dresser, or a double-cut saw carriage.
Specifications
| Manufacturer | Armstrong Mfg. |
| Model | Vari-Sharp |
| Condition | Used |
| Stock Number | 105029 |






